This robust 0.740" thick polycarbonate sheet offers exceptional impact resistance and clarity. Its substantial dimensions (44" x 15") make it suitable for a wide range of demanding applications requiring a strong, protective barrier.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.740" |
| Length | 44" |
| Width | 15" |
Manufactured under strict quality controls, this 0.740" thick polycarbonate sheet (44" x 15") provides superior impact strength and clarity. Polycarbonate's inherent toughness makes it resistant to shattering and cracking, even under extreme conditions. Its UV-resistant properties ensure long-term durability in outdoor environments. This material is easily fabricated through cutting, drilling, and thermoforming, allowing for custom solutions in various industrial settings. Ideal for applications demanding high protection and visibility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and free of debris. 2. Carefully measure and mark the sheet according to the required dimensions. 3. Cut the polycarbonate sheet using appropriate tools such as a fine-tooth saw or laser cutter, maintaining a consistent feed rate to prevent melting. 4. Smooth any rough edges with fine-grit sandpaper.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a saw blade with too few teeth, causing melting or chipping during cutting. | Utilize a saw blade specifically designed for plastics, featuring a high tooth count and a negative rake angle. |
| Drilling holes too close to the edge without proper support, leading to stress cracks. | Maintain adequate edge distance for drilled holes, and consider using a backing material during drilling. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective machine guards, Impact-resistant glazing, Fabricated enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||