This robust polycarbonate stock sheet provides exceptional strength and impact resistance for critical suspending and bracing applications. Engineered for demanding environments, it offers a reliable solution for structural support and protection.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.732" |
| Length | 24" |
| Width | 36" |
A high-performance industrial component, this 0.732-inch thick polycarbonate stock sheet measures 24 inches by 36 inches. Manufactured from high-clarity, impact-modified polycarbonate resin, it exhibits superior tensile strength, excellent dimensional stability, and a high service temperature range. Its inherent UV resistance and chemical inertness make it ideal for corrosive or outdoor environments, fulfilling stringent requirements for load-bearing and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Precisely mark and drill mounting holes according to design specifications, using appropriate drill bits for polycarbonate. 3. Securely fasten the polycarbonate sheet using corrosion-resistant hardware, ensuring even pressure distribution to prevent stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to potential cracking. | Maintain adequate edge distance (typically 2-3 times the hole diameter) when drilling. |
| Over-tightening fasteners, causing stress and potential delamination. | Use washers and tighten fasteners only until snug, allowing for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding and enclosures, Structural bracing for sensitive equipment, Protective shields in high-impact areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||