This robust 0.673-inch thick polycarbonate stock sheet is engineered for demanding suspending and bracing applications. Its exceptional impact strength and clarity make it ideal for structurally critical components.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.673" |
| Length | 22" |
| Width | 37" |
Built to exacting engineering tolerances, this 0.673" thick polycarbonate stock sheet measures 22" in length and 37" in width. Engineered from high-impact polycarbonate, it offers superior tensile strength and rigidity, making it an ideal material for load-bearing bracing and suspension systems. This material exhibits excellent UV resistance and a wide operating temperature range, ensuring long-term performance in challenging environments. Its clarity also allows for visual inspection of integrated components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean, dry, and free from debris. 2. Precisely mark and drill mounting holes according to design specifications, utilizing appropriate drill bits for polycarbonate. 3. Secure the sheet firmly using corrosion-resistant fasteners, ensuring even pressure distribution to avoid stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, causing stress fractures. | Maintain adequate edge distance for all drilled holes, typically a minimum of 2 times the hole diameter. |
| Over-tightening fasteners, leading to cracking or deformation. | Use appropriate torque settings for fasteners and consider using sealing washers for optimal stress distribution. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Industrial bracing structures, Suspended equipment mounting, High-impact protective barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||