Engineered for demanding environments, this 0.594" thick polycarbonate stock sheet provides exceptional impact strength and clarity, making it ideal for protective barriers and machine guarding.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.594" |
| Length | 42" |
| Width | 16" |
A proven choice for industrial professionals, this polycarbonate stock sheet offers unparalleled impact resistance, exceeding that of glass and acrylic by a significant margin. With a precise thickness of 0.594 inches, a generous length of 42 inches, and a width of 16 inches, it provides ample material for custom fabrication. Its inherent UV resistance prevents yellowing and degradation, ensuring long-term performance in harsh conditions. This material's high tensile strength and dimensional stability make it suitable for critical safety applications where operator protection and equipment integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, ensuring proper alignment with any pre-drilled holes or mounting hardware. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress points. Do not over-tighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to potential cracking. | Maintain a minimum edge distance of at least 2 times the hole diameter when drilling. |
| Using abrasive cleaners or solvents that can damage the polycarbonate surface. | Clean with mild soap and water, or a specialized polycarbonate cleaner. Rinse thoroughly. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Safety Shields, Impact-Resistant Glazing, Protective Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||