This 0.593-inch thick polycarbonate stock sheet offers exceptional impact strength and chemical resistance, making it a superior choice for demanding lubricating applications. Its superior durability ensures long-term performance in challenging environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.593" |
| Length | 31" |
| Width | 32" |
Manufactured under strict quality controls, this polycarbonate stock sheet boasts a nominal thickness of 0.593 inches, a length of 31 inches, and a width of 32 inches. Engineered for superior lubricity, this grade of polycarbonate exhibits excellent wear resistance and a low coefficient of friction, crucial for reducing wear and tear on moving parts. Its inherent toughness and resistance to a broad spectrum of chemicals make it suitable for components in conveyors, chutes, and sliding mechanisms within industrial processing equipment where reduced friction and enhanced lifespan are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Precisely cut the sheet to the required dimensions using appropriate tooling. 3. Securely fasten the sheet using compatible fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate for high-wear lubricating applications. | Specify and utilize the lubricating grade of polycarbonate for enhanced wear resistance and reduced friction. |
| Over-tightening fasteners, leading to stress cracking. | Use appropriate torque settings and consider using oversized holes or washers to distribute load. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Wear strips for conveyors, Chute liners for material handling, Low-friction guides and slides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||