This robust 0.585-inch thick polycarbonate stock sheet offers exceptional impact resistance and clarity, making it ideal for demanding suspending and bracing applications in industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.585" |
| Length | 40" |
| Width | 19" |
A high-performance industrial component, this 0.585" thick polycarbonate stock sheet (40" length x 19" width) is engineered for superior durability and versatility. Its inherent toughness and excellent impact strength make it suitable for applications requiring significant load-bearing capacity and resistance to fracture. Polycarbonate's clarity allows for visual inspection of braced components, while its wide temperature range ensures reliable performance in diverse operational conditions. This material is also resistant to many common industrial chemicals, further enhancing its suitability for harsh environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the polycarbonate sheet to the required dimensions for your suspending or bracing application. 2. Securely fasten the sheet using appropriate industrial-grade hardware, ensuring even load distribution. 3. Verify structural integrity and alignment of the installed component before placing it into service.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Use washers and avoid excessive torque when securing the sheet; hand-tighten and then slightly increase pressure if necessary. |
| Using incompatible adhesives or cleaning agents that can degrade the polycarbonate. | Consult the material safety data sheet (MSDS) for recommended adhesives and cleaning solutions; opt for mild detergents and soft cloths. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Structural bracing for industrial equipment, Protective shielding for sensitive machinery, Custom mounting plates and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||