This robust 0.572-inch thick Polycarbonate stock sheet offers exceptional impact resistance and clarity, making it ideal for fabricating durable components in pneumatic systems.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.572" |
| Length | 48" |
| Width | 38" |
Specified by design engineers worldwide, this 0.572" thick Polycarbonate stock sheet (48" L x 38" W) provides superior impact strength and an excellent clarity-to-strength ratio. Its inherent toughness makes it resistant to shattering under pressure and incidental impact, crucial for safety and longevity in pneumatic enclosures, guards, and custom component fabrication. The material's machinability allows for precise shaping and drilling, ensuring seamless integration into complex pneumatic assemblies. Its wide temperature range and chemical resistance further enhance its suitability for diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Precisely cut the polycarbonate sheet to the required dimensions using appropriate tooling. 3. Secure the sheet using compatible fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper cooling, leading to melting and chipping. | Employ specialized polycarbonate drill bits and utilize a slow, consistent feed rate with appropriate coolant or air blast. |
| Over-tightening fasteners, inducing stress concentrations that can cause cracks. | Use washers and tighten fasteners incrementally to a snug fit, allowing for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic system enclosures, Machine guarding for pneumatic equipment, Custom fabricated pneumatic component housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||