This robust polycarbonate stock sheet offers exceptional durability and impact resistance. Its 0.567-inch thickness and substantial dimensions make it ideal for demanding suspending and bracing applications in industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.567" |
| Length | 37" |
| Width | 36" |
A proven choice for industrial professionals, this 0.567-inch thick polycarbonate stock sheet, measuring 37 inches in length and 36 inches in width, delivers superior performance. Fabricated from high-impact polycarbonate, it exhibits outstanding toughness, a high tensile strength, and excellent clarity, making it suitable for applications requiring both structural integrity and visibility. Its excellent UV resistance ensures longevity in outdoor or exposed environments, while its broad temperature tolerance allows for use in diverse operating conditions. This material is readily machinable and can be formed, drilled, and cut with standard industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Precisely measure and mark cut lines on the polycarbonate sheet. 3. Securely fasten the sheet using appropriate industrial-grade hardware, ensuring even weight distribution. 4. Verify all connections and loads are within the material's specified capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or inadequate support points, leading to premature failure. | Always utilize fasteners with a diameter and load rating appropriate for the sheet's thickness and intended application, and ensure support points are strategically placed for optimal load distribution. |
| Applying excessive torque during fastening, which can cause stress cracking around the fastener holes. | Tighten fasteners until snug, then an additional quarter turn. Avoid over-tightening. Consider using washers to spread the load if necessary. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and enclosures, Industrial shelving and bracing, Protective barriers and partitions.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||