This high-impact polycarbonate stock sheet, engineered for lubricating applications, offers exceptional wear resistance and a low coefficient of friction. Its robust nature ensures longevity in demanding environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.548" |
| Length | 24" |
| Width | 21" |
Specified by design engineers worldwide, this 0.548" thick polycarbonate stock sheet is manufactured to exacting standards for superior performance in lubricating applications. Measuring 24" in length and 21" in width, it exhibits excellent tensile strength, impact resistance, and a naturally low coefficient of friction, minimizing wear and heat generation in moving parts. Its inherent chemical resistance further enhances its suitability for environments where lubrication is critical for operational efficiency and component longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of contaminants. 2. Carefully measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using designated fasteners or adhesives, ensuring a snug fit without over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate where a specific lubricating grade is required. | Always specify and use polycarbonate sheets formulated for lubricating applications to ensure optimal performance and longevity. |
| Over-tightening fasteners, leading to stress concentrations. | Utilize appropriate torque settings and consider the use of washers to distribute load and prevent localized stress cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction bearing surfaces, Wear strips and guides, Sealing components in lubricated systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||