This robust Polycarbonate stock sheet offers exceptional impact resistance and clarity for demanding pneumatic applications. Its 0.533-inch thickness provides substantial structural integrity for enclosures and protective shielding.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.533" |
| Length | 43" |
| Width | 26" |
Built to exacting engineering tolerances, this 0.533-inch thick Polycarbonate stock sheet measures 43 inches in length and 26 inches in width. Polycarbonate's inherent properties, including high impact strength (up to 200 times stronger than glass), excellent optical clarity, and a wide operating temperature range (-40°F to 250°F), make it an ideal material for robust pneumatic system components. This sheet is engineered for fabrication into protective enclosures, machine guards, sight glasses, and pressure-resistant housings where safety and visibility are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Polycarbonate sheet to the required dimensions using appropriate tooling. 2. Deburr all edges to prevent stress concentration and facilitate smooth assembly. 3. Secure the fabricated component using appropriate fasteners, ensuring even distribution of load and avoiding over-tightening to prevent cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize high-speed steel or carbide-tipped cutting tools specifically designed for plastic fabrication, maintaining appropriate feed rates and cooling. |
| Drilling holes without proper support or technique, causing stress cracks. | Support the backside of the sheet during drilling and use a sharp drill bit with a suitable point angle for plastics; consider pilot holes for larger diameters. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic Enclosures and Housings, Machine Guards and Safety Shields, Sight Glasses for Fluid Monitoring.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||