This premium polycarbonate stock sheet offers exceptional impact resistance and electrical insulation properties. Precisely manufactured to stringent standards for reliable performance in demanding applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.517" |
| Length | 45" |
| Width | 44" |
Specified by design engineers worldwide, this 0.517-inch thick polycarbonate sheet provides superior impact strength (Izod impact: 150 ft-lb/in) and excellent dielectric strength (700 V/mil). Its wide operating temperature range (-40°F to 248°F) and UV resistance make it suitable for both indoor and outdoor electrical enclosures, machine guards, and protective lighting covers. The 45-inch by 44-inch dimensions offer ample material for custom fabrication and large-scale projects, ensuring dimensional stability under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully cut the polycarbonate sheet to the required dimensions using appropriate tools (e.g., circular saw with fine-tooth blade). 3. Secure the sheet using non-abrasive fasteners, avoiding overtightening to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polycarbonate, leading to chipping or melting. | Employ a fine-tooth carbide blade specifically designed for plastics and maintain a consistent, moderate feed rate. |
| Over-tightening fasteners, causing stress cracks or deformation in the sheet. | Utilize washers and tighten fasteners only until snug, allowing for thermal expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Electrical Enclosures and Housings, Machine Guarding and Safety Shields, Lighting Diffusers and Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||