High-impact polycarbonate stock sheet, precisely manufactured for demanding industrial and commercial applications. Offers exceptional clarity, durability, and protective qualities.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.505" |
| Length | 43" |
| Width | 46" |
Manufactured under strict quality controls, this 0.505-inch thick polycarbonate stock sheet measures 43 inches by 46 inches. Engineered for superior impact resistance, it exhibits excellent optical clarity and a wide operating temperature range. Its inherent toughness makes it ideal for applications requiring robust protection against physical stress, abrasion, and environmental factors. The material's low flammability rating and dimensional stability further enhance its suitability for critical industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with mounting points or cut lines. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress cracking. | Use washers and avoid overtightening; allow for thermal expansion. |
| Using incompatible cleaning agents, leading to surface degradation. | Clean with mild soap and water; avoid abrasive cleaners or solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guards and Safety Shields, Custom Fabrication and Enclosures, Protective Barriers and Partitions.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||