High-performance polycarbonate stock sheet, specifically formulated for lubricating applications. This material offers exceptional impact resistance and a low coefficient of friction, ideal for demanding industrial environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.500" |
| Length | 35" |
| Width | 45" |
Specified by design engineers worldwide, this 0.500-inch thick polycarbonate stock sheet (35"x45") delivers superior lubricity due to its inherent material properties. Its high impact strength, excellent chemical resistance, and dimensional stability at operating temperatures make it ideal for components requiring reduced friction and wear. Typical applications include low-friction slide bearings, wear strips, and guiding elements in automated machinery where consistent performance under load is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Cut the polycarbonate sheet to the required dimensions using appropriate tooling. 3. Secure the sheet using mechanical fasteners or approved adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate for high-friction applications. | Always specify a lubricating grade polycarbonate for components requiring reduced friction and wear. |
| Over-tightening fasteners, causing stress concentrations. | Utilize washers and avoid over-tightening fasteners to prevent cracking or deformation. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction slide bearings, Wear strips and guides, Protective covers with reduced friction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||