Engineered for extreme durability, this 0.445" thick polycarbonate stock sheet provides exceptional impact resistance and clarity. Ideal for robust pneumatic enclosures and components requiring superior protection.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.445" |
| Length | 30" |
| Width | 35" |
Purpose-built for heavy-duty applications, this 0.445" thick polycarbonate stock sheet offers exceptional impact strength and chemical resistance, crucial for demanding pneumatic environments. With dimensions of 30" in length and 35" in width, it provides ample material for custom fabrication of enclosures, sight glasses, and protective guards. Its inherent clarity ensures excellent visibility of internal pneumatic components, while its high tensile strength prevents deformation under pressure. This material conforms to industry standards for industrial plastics, ensuring reliable performance and longevity in harsh operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools for plastics. 3. Secure the sheet using corrosion-resistant fasteners, ensuring even pressure distribution to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drills without pilot holes, leading to cracking. | Pre-drill pilot holes with a sharp drill bit designed for plastics, and use a slow, consistent speed. |
| Over-tightening fasteners, causing stress concentrations. | Tighten fasteners until snug, then back off slightly. Utilize washers to distribute load if necessary. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic control panel enclosures, Protective machine guarding for pneumatic systems, Sight glasses for pneumatic cylinders and accumulators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||