Engineered from high-impact polycarbonate, this 0.426-inch thick stock sheet offers exceptional durability for demanding industrial settings. Its superior clarity and strength make it ideal for protective barriers and machine guards.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.426" |
| Length | 24" |
| Width | 47" |
Designed for demanding industrial environments, this 0.426-inch thick Polycarbonate Stock Sheet measures 24 inches in width and 47 inches in length. Polycarbonate offers superior impact resistance, exceeding that of glass and acrylic, making it ideal for applications requiring protection against physical damage. Its excellent optical clarity ensures visibility, while its thermal stability allows for use in a wide temperature range. This material is also highly resistant to chemicals and UV radiation, ensuring longevity and performance in harsh conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or intended mounting points. 3. Secure the sheet using appropriate fasteners, ensuring not to overtighten which could cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper technique, leading to chipping or cracking. | Employ a sharp, high-speed steel drill bit specifically designed for plastics. Drill at a moderate speed and apply steady pressure, allowing the bit to clear chips frequently. |
| Over-tightening fasteners, creating stress points that can lead to premature failure. | Utilize washers to distribute pressure evenly. Fasten screws or bolts until snug, then back off slightly to avoid excessive compression on the polycarbonate. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding, Protective barriers, Glazing for industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||