This premium lubricating grade polycarbonate stock sheet offers exceptional impact resistance and a low coefficient of friction. Its robust 0.412" thickness ensures durability for demanding industrial applications requiring smooth, reduced-wear surfaces.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.412" |
| Length | 26" |
| Width | 25" |
Built to exacting engineering tolerances, this 0.412-inch thick polycarbonate stock sheet, measuring 26 inches by 25 inches, is specifically formulated for low-friction environments. The material's inherent lubricity, combined with its superior impact strength and chemical resistance, makes it ideal for applications such as wear strips, guide rails, and internal components in automated machinery where reduced friction and extended service life are critical. Its dimensional stability ensures consistent performance under varying operational loads and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean, dry, and free from contaminants. 2. Carefully position the polycarbonate sheet according to design requirements. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent localized stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress cracks. | Use washers and tighten fasteners to a snug fit, avoiding excessive torque. |
| Using abrasive cleaning agents that can scratch the surface. | Clean with mild soap and water, or a non-abrasive polycarbonate cleaner. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips, Guide rails in material handling, Internal components for reduced friction in machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||