Engineered for demanding applications, this 0.404" thick polycarbonate sheet offers superior impact resistance and clarity. Its robust construction makes it ideal for protective barriers, custom fabrication, and industrial enclosures.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.404" |
| Length | 46" |
| Width | 24" |
Built to exacting engineering tolerances, this 0.404-inch thick polycarbonate stock sheet measures 46 inches in length and 24 inches in width. Manufactured from high-performance polycarbonate resin, it exhibits exceptional impact strength (Izod impact strength typically > 700 J/m), optical clarity, and a wide operating temperature range. The material is UV-stabilized for enhanced weatherability and resistance to yellowing. Its dimensional stability and ease of machining allow for precise integration into custom designs and protective applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for mounting is clean, dry, and free of debris. 2. Mark and drill mounting holes in the polycarbonate sheet, ensuring hole diameter is slightly larger than the fastener to allow for thermal expansion. 3. Securely fasten the sheet using appropriate hardware, avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to potential cracking. | Maintain a minimum edge distance of 2x the hole diameter when drilling. |
| Using fasteners that are too small or overtightening them. | Utilize appropriately sized fasteners and washers, and tighten only until snug to prevent stress concentration. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and safety shields, Protective barriers and enclosures, Custom fabrication and prototyping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||