This high-performance polycarbonate stock sheet is engineered for demanding abrading and polishing processes. Its superior impact resistance and optical clarity make it ideal for protective shielding and substrate applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.382" |
| Length | 20" |
| Width | 19" |
Manufactured under strict quality controls, this polycarbonate stock sheet boasts a nominal thickness of 0.382 inches, a length of 20 inches, and a width of 19 inches. Polycarbonate is renowned for its exceptional impact strength, exceeding that of glass and acrylics by a significant margin, while maintaining excellent optical clarity. Its inherent UV resistance and wide operating temperature range make it suitable for diverse industrial environments. The material's toughness ensures it can withstand abrasive forces and repeated polishing cycles without delamination or fracture, contributing to extended service life in critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to be covered is clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with the intended application area. 3. Secure the sheet using appropriate mechanical fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polycarbonate. | Utilize high-speed steel or carbide-tipped saw blades specifically designed for cutting plastics to prevent chipping and melting. |
| Over-tightening fasteners, causing stress cracking. | Employ washers and avoid direct metal-to-plastic contact. Gradually tighten fasteners in a cross pattern to distribute stress evenly. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective shielding for abrasive machinery, Polishing substrate surfaces, Tooling and jig components in finishing processes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||