This high-quality polycarbonate stock sheet is engineered for superior performance in lubricating applications. Its robust material properties and precise dimensions ensure reliability and durability in demanding industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.356" |
| Length | 19" |
| Width | 30" |
Manufactured under strict quality controls, this 0.356-inch thick polycarbonate stock sheet offers exceptional impact strength and a low coefficient of friction, crucial for reducing wear in dynamic systems. Its dimensions of 19 inches by 30 inches provide ample material for fabrication of custom components such as low-friction guides, wear strips, and specialized bearing surfaces. Polycarbonate's inherent chemical resistance and thermal stability further enhance its suitability for a wide range of operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of debris. 2. Precisely cut the polycarbonate sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the substrate, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inappropriate cutting tools, leading to chipping or melting. | Employ sharp, carbide-tipped blades designed for plastic cutting and maintain a consistent feed rate to prevent heat buildup. |
| Over-tightening fasteners, causing stress cracking in the polycarbonate. | Use washers and avoid overtightening. Allow for slight thermal expansion by not securing the sheet rigidly at all points if significant temperature fluctuations are expected. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction linear guides, Wear strips in material handling systems, Custom bearing surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||