This premium 0.347-inch thick polycarbonate stock sheet offers exceptional impact resistance and optical clarity, making it the superior choice for demanding abrading and polishing applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.347" |
| Length | 38" |
| Width | 21" |
Specified by design engineers worldwide, this 0.347" thick polycarbonate stock sheet offers a robust solution for critical industrial applications. With a length of 38" and a width of 21", it provides ample material for fabrication. Polycarbonate's inherent toughness, excellent impact strength exceeding glass, and good abrasion resistance make it ideal for protective shielding, machine guards, and specialized fixtures in abrading and polishing environments. Its clarity ensures visibility while maintaining structural integrity under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly to remove all debris and contaminants. 2. Position the polycarbonate sheet carefully, ensuring alignment with the intended application. 3. Secure the sheet using appropriate mechanical fasteners or adhesives, avoiding excessive stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and avoid overtightening; allow for thermal expansion. |
| Using abrasive cleaning agents that can scratch the surface. | Employ only mild soap and water or approved polycarbonate cleaners. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards for polishing equipment, Protective shielding in abrasive environments, Custom fixtures for polishing jigs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||