This 0.335" thick polycarbonate stock sheet, measuring 32" x 15", offers exceptional impact resistance and clarity for critical pneumatic system components. Engineered for durability and performance.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.335" |
| Length | 32" |
| Width | 15" |
Specified by design engineers worldwide, this 0.335-inch thick polycarbonate stock sheet (32" x 15") is a cornerstone material in high-pressure pneumatic applications. Its inherent toughness and excellent impact strength, exceeding that of glass and acrylic, make it ideal for fabricating robust enclosures, sight glasses, and protective guards where failure is not an option. Polycarbonate's superior clarity ensures excellent visibility of internal components, while its broad operating temperature range (-40°F to 250°F) and good chemical resistance to many oils and greases used in pneumatic systems contribute to its reliability and longevity in demanding industrial environments. Its machinability allows for precise fabrication of complex geometries required for custom pneumatic solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to desired dimensions using appropriate polycarbonate cutting tools. 2. Smooth edges with a fine-grit sandpaper or deburring tool. 3. Secure the polycarbonate component using fasteners designed for plastic, ensuring even pressure distribution. 4. Clean surfaces with a mild detergent and water; avoid abrasive cleaners or solvents.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools without proper adjustments, leading to cracking or chipping. | Employ specialized polycarbonate cutting tools with appropriate feeds and speeds, and ensure adequate support for the sheet during cutting. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Utilize fasteners with washers to distribute load and tighten them only until snug, avoiding excessive force. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic cylinder shields and covers, Sight glasses for pneumatic reservoirs, Protective enclosures for pneumatic control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||