This 0.318" thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Ideal for demanding material handling applications, protective guarding, and custom fabrication.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.318" |
| Length | 17" |
| Width | 33" |
Manufactured under strict quality controls, this 0.318" thick polycarbonate sheet is engineered for superior performance. Its inherent toughness provides excellent impact and shatter resistance, crucial for material handling environments. The material's high tensile strength and dimensional stability ensure reliable performance in various conditions. With a standard size of 17" x 33", it's suitable for immediate use or further fabrication into custom solutions like machine guards, protective windows, or impact-resistant panels.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Position the polycarbonate sheet carefully, aligning with intended mounting points. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening which can cause stress cracking. Consider specialized fasteners for polycarbonate if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drilling bits without proper technique, leading to chipping or cracking. | Employ a sharp drill bit specifically designed for plastics, and utilize a slow, consistent speed with minimal pressure. Backing the material with wood can also prevent blowout. |
| Tightening fasteners excessively, causing stress concentrations and potential failure. | Use washers and allow for slight expansion and contraction by not overtightening. Consider oversized holes with grommets for larger panels. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Barriers, Impact-Resistant Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||