This premium polycarbonate stock sheet offers exceptional impact resistance and clarity. Engineered for demanding safety applications, it provides a durable and reliable barrier solution for industrial environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.310" |
| Length | 35" |
| Width | 45" |
A high-performance industrial component, this 0.310" thick polycarbonate sheet is manufactured to stringent quality standards. Its inherent toughness and shatter-resistant properties make it ideal for applications requiring superior impact and abrasion resistance. Measuring 35" x 45", this material exhibits excellent optical clarity and UV stability, ensuring long-term performance in diverse environmental conditions. It is a preferred choice for machine guarding, protective shields, and safety glazing where worker protection and equipment integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet according to design specifications. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without proper washers or grommets. | Utilize wide-tolerance washers or grommets to distribute load and prevent localized stress points that could lead to cracking. |
| Drilling holes too close to the edge of the sheet. | Maintain an adequate edge distance for drilled holes (typically 2x sheet thickness minimum) to prevent edge delamination or fracture. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Safety Shields, Protective Glazing, Point-of-Purchase Displays, Industrial Windows.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||