This 0.261-inch thick polycarbonate stock sheet, measuring 15 inches by 30 inches, is engineered for demanding measuring and inspection tasks. Its exceptional impact resistance and optical clarity make it ideal for critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.261" |
| Length | 15" |
| Width | 30" |
Specified by design engineers worldwide, this polycarbonate stock sheet offers superior impact strength, exceeding that of glass and acrylic. Its 0.261-inch thickness provides substantial rigidity for flatness in precision measurement setups. The material exhibits excellent optical clarity for visual inspection and light transmission. Operating temperature ranges from -40°F to 248°F. This sheet is RoHS compliant and offers good chemical resistance. Its dimensional stability ensures consistent performance under varying environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free of debris. 2. Carefully align the polycarbonate sheet to its intended position. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to cracking. | Maintain adequate edge distance when drilling, typically at least 2 times the hole diameter. |
| Using abrasive cleaners that can scratch the surface. | Clean with mild soap and water, using a soft cloth. Avoid harsh chemicals or abrasive pads. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding for inspection equipment, Custom measurement fixtures, Optical templates and jigs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||