This 0.248-inch thick polycarbonate stock sheet offers exceptional impact resistance and optical clarity. Precisely dimensioned at 20" x 34", it's engineered for demanding applications requiring durability and visibility.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.248" |
| Length | 20" |
| Width | 34" |
Specified by design engineers worldwide, this premium polycarbonate sheet (0.248" thickness, 20" x 34" dimensions) exhibits an outstanding balance of strength, impact resilience (IZOD impact strength > 100 ft-lb/in), and transparency. Its excellent thermal stability (continuous use temperature up to 250°F) and chemical resistance make it suitable for protective glazing, machine enclosures, and custom fabricated components in industrial and commercial environments. Meets ASTM D3935 standards for polycarbonate sheets.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with mounting points or edges. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even pressure distribution to avoid stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress cracking. | Utilize oversized holes for fasteners and incorporate washers to distribute load. Avoid direct contact between metal fasteners and polycarbonate where possible. |
| Using incompatible cleaning agents, leading to surface crazing. | Clean only with mild soap and water. Avoid abrasive cleaners, solvents, or ammonia-based products. Refer to manufacturer's cleaning guidelines. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Glazing, Custom Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||