This robust polycarbonate stock sheet is engineered for demanding electrical and lighting applications. Offering exceptional impact strength and clarity, it provides reliable protection and excellent light transmission.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.246" |
| Length | 21" |
| Width | 41" |
A high-performance industrial component, this 0.246-inch thick polycarbonate sheet measures 21 inches by 41 inches. Polycarbonate is renowned for its superior impact resistance, surpassing glass and other plastics, making it ideal for protective glazing and enclosures in electrical environments. Its excellent thermal stability allows it to perform reliably across a wide temperature range, and its inherent flame retardancy meets stringent safety standards for lighting fixtures and electrical panel covers. The material's high light transmission ensures efficient illumination while providing a durable barrier against environmental factors and potential damage.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, avoiding overtightening to prevent stress cracking. Ensure a snug, even fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without washers, leading to stress concentrations and potential cracking. | Always use flat, wide washers to distribute the load evenly across the polycarbonate surface. |
| Drilling holes too close to the edge, compromising structural integrity. | Maintain adequate edge distance for all drilled holes to prevent premature failure. |
| Exposing the polycarbonate to harsh chemicals or solvents that can cause degradation. | Consult the manufacturer's chemical resistance chart and use only approved cleaning agents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Electrical Enclosures and Covers, Machine Guarding, Lighting Diffusers and Fixtures, Industrial Control Panels, Protective Glazing in Harsh Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||