This high-impact polycarbonate stock sheet offers exceptional clarity and durability. Engineered for demanding industrial environments, it provides superior protection and visibility in safety applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.221" |
| Length | 28" |
| Width | 45" |
A proven choice for industrial professionals, this 0.221-inch thick polycarbonate sheet measures 28 inches in width and 45 inches in length. Exhibiting an industry-leading impact resistance, it offers a significantly higher strength-to-weight ratio than glass. Its excellent optical clarity ensures unobstructed viewing while providing a robust physical barrier against hazards. Ideal for machine guarding, safety shields, and protective enclosures where high durability and impact survivability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Cut to size using appropriate polycarbonate cutting tools (e.g., fine-tooth saw, laser cutter). 3. Secure sheet using mechanically fastened hardware, ensuring even pressure distribution. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drills without a pilot hole or proper bit. | Drill pilot holes and use a sharp, high-speed steel bit designed for plastics to prevent cracking. |
| Over-tightening fasteners, causing stress and potential cracking. | Use washers and tighten fasteners just enough to secure the sheet without deforming it. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Safety Shields, Protective Barriers, Glazing in High-Impact Areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||