This 0.203" thick polycarbonate stock sheet offers exceptional durability and a naturally low-friction surface. It is engineered for demanding applications requiring wear resistance and smooth operation without external lubrication.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.203" |
| Length | 18" |
| Width | 21" |
Engineered for reliability and performance, this polycarbonate stock sheet features a nominal thickness of 0.203 inches, a length of 18 inches, and a width of 21 inches. Its inherent lubricity, derived from the polymer structure, minimizes friction and wear in sliding or bearing applications. This material boasts excellent impact strength, good chemical resistance, and dimensional stability across a moderate temperature range, making it suitable for custom fabrication of wear strips, guides, and low-friction components in various industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from debris. 2. Accurately cut the polycarbonate sheet to the required dimensions using appropriate tooling. 3. Securely fasten the sheet to the substrate using mechanical fasteners or a suitable adhesive, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using solvents that are incompatible with polycarbonate. | Consult chemical resistance charts and use only approved cleaning agents and adhesives for polycarbonate. |
| Over-tightening fasteners, causing stress concentrations and cracking. | Utilize appropriately sized washers and avoid excessive torque when fastening. Consider slotted holes for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Wear strips and guides in material handling systems, Low-friction bearing surfaces for sliding components, Chute liners and hopper surfaces to prevent material hang-up, Custom fabricated protective covers with low-friction interfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||