This lubricating grade polycarbonate stock sheet offers exceptional impact resistance and inherent low-friction properties. It's engineered for applications requiring reduced wear and smooth operation in demanding industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.186" |
| Length | 47" |
| Width | 37" |
Manufactured under strict quality controls, this polycarbonate stock sheet boasts a precise thickness of 0.186 inches, a length of 47 inches, and a width of 37 inches. Its inherent lubricating properties, derived from specialized additives, provide excellent wear resistance and a low coefficient of friction, making it superior to standard polycarbonate for sliding or rotating components. This material exhibits high tensile strength, good dimensional stability, and excellent optical clarity, suitable for custom machining into bushings, guides, and other low-friction mechanical parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean and free from debris. 2. Carefully position the polycarbonate sheet, aligning with any pre-drilled holes or cutouts. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracking. | Use washers and tighten fasteners incrementally to distribute load and avoid over-compression. |
| Using abrasive cleaning agents that can scratch the surface. | Clean with a mild soap and water solution, followed by a soft, lint-free cloth. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips, Guide rails for material handling, Custom bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||