This high-impact polycarbonate sheet offers superior protection and clarity. Engineered for robustness, it's the ideal material for safeguarding personnel and equipment in challenging industrial settings.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.174" |
| Length | 42" |
| Width | 27" |
Designed for demanding industrial environments, this 0.174-inch thick polycarbonate stock sheet measures 42 inches in length by 27 inches in width. Its exceptional impact resistance, exceeding that of glass and acrylic, makes it ideal for machine guarding, protective barriers, and impact shields. The material exhibits excellent optical clarity, high temperature resistance, and is UV stabilized for extended outdoor use. Its lightweight nature and ease of fabrication simplify installation and customization for a wide range of safety-critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners (e.g., screws with washers), avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to stress cracks and premature failure. | Use washers with fasteners and tighten just enough to create a snug fit, allowing for slight thermal expansion. |
| Using abrasive cleaning agents or solvents that can damage the polycarbonate surface. | Clean with mild soap and water or a specialized polycarbonate cleaner. Avoid ammonia-based or abrasive products. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Barriers, Impact Shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||