Engineered for demanding pneumatic systems, this 0.154" thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Its robust nature ensures reliability in harsh environments, providing a dependable material solution.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.154" |
| Length | 13" |
| Width | 32" |
Specified by design engineers worldwide, this 0.154" thick polycarbonate stock sheet measures 13 inches in width and 32 inches in length. Its superior impact strength, exceeding that of glass and acrylic, makes it ideal for protective enclosures, sight glasses, and manifold components within pneumatic machinery. The material's excellent optical clarity allows for easy visual inspection of internal mechanisms, while its inherent toughness resists cracking and shattering under operational stress. Polycarbonate's broad operating temperature range and chemical resistance further enhance its suitability for diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and accurately cut the polycarbonate sheet to the required dimensions using a fine-tooth saw or laser cutter. 2. Smooth all cut edges with a deburring tool or fine-grit sandpaper to prevent stress concentrations. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid warping. Pre-drilling holes with a slight clearance is recommended.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits for holes, leading to cracking. | Utilize a sharp, high-speed drill bit designed for plastics, with a pilot hole and slow feed rate to prevent thermal stress and cracking. |
| Over-tightening fasteners, causing stress and potential failure. | Employ washers and hand-tighten fasteners, leaving a small amount of play to accommodate thermal expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective machine guards for pneumatic actuators, Sight glasses for pneumatic cylinders and valves, Custom manifold fabrication for pneumatic control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||