This high-performance polycarbonate stock sheet offers superior impact strength and optical clarity. Precisely manufactured to 0.128" thickness, 14" width, and 36" length, it's ideal for custom fabrication and protective applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.128" |
| Length | 14" |
| Width | 36" |
Built to exacting engineering tolerances, this polycarbonate stock sheet measures 0.128 inches in thickness, 14 inches in width, and 36 inches in length. Fabricated from virgin polycarbonate resin, it exhibits exceptional impact resistance (Izod notched impact strength > 100 ft-lb/in), high tensile strength (yield strength ~ 8,000 psi), and excellent optical clarity (typically > 88% light transmission). Its wide operating temperature range (-40°F to 265°F) and UV resistance make it suitable for diverse environmental conditions, from machine guards to protective glazing and custom signage.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure cutting tools are sharp and appropriate for polycarbonate to prevent chipping or melting. 2. Carefully measure and mark desired cut lines on the protective film. 3. Support the sheet adequately during cutting to avoid stress fractures. Use a slow, steady feed rate. 4. Remove protective film after fabrication and clean surfaces with a mild, non-abrasive cleaner.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to poor edge quality and potential delamination. | Employ sharp, carbide-tipped blades designed for plastics. Ensure proper blade speed and feed rate to prevent heat buildup and melting. |
| Over-tightening fasteners during assembly, which can induce stress and cause cracking or crazing. | Use oversized holes for fasteners and allow for expansion/contraction. Do not overtighten; secure fasteners to a snug fit. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Glazing, Custom Fabrication Components, Signage Backings, Point-of-Purchase Displays.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||