This 0.121-inch thick polycarbonate stock sheet offers superior impact resistance and optical clarity, making it an ideal material for protective enclosures and transparent components in pneumatic applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.121" |
| Length | 36" |
| Width | 36" |
Built to exacting engineering tolerances, this 0.121" thick polycarbonate stock sheet boasts a nominal length of 36" and width of 36". Its exceptional impact strength, surpassing that of glass, combined with excellent optical clarity, makes it suitable for demanding environments. The material exhibits good chemical resistance and a wide operating temperature range, ensuring reliable performance in pneumatic systems. Typical applications include machine guards, sight glasses, and protective covers for sensitive pneumatic controls and actuators.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean and free from debris. 2. Carefully position the polycarbonate sheet, aligning with mounting holes or frame. 3. Secure the sheet using appropriate fasteners, avoiding overtightening which can induce stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without washers, leading to stress concentration and potential cracking. | Utilize flat, large-diameter washers with all fasteners to distribute load evenly across the polycarbonate surface. |
| Drilling holes too close to the edge, compromising structural integrity. | Maintain a minimum edge distance of at least twice the hole diameter for all drilled holes. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guards for Pneumatic Machinery, Sight Glasses for Pneumatic Cylinders and Valves, Protective Covers for Pneumatic Control Panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||