This 0.114" thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Measuring 14" x 33", it's a versatile material for protective shields, custom fabrication, and industrial applications requiring durability.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.114" |
| Length | 14" |
| Width | 33" |
Engineered for reliability and performance, this 0.114" thick polycarbonate stock sheet provides superior impact strength and optical clarity, significantly outperforming acrylic. Its dimensions of 14" in width and 33" in length make it suitable for a wide range of applications, including machine guarding, protective barriers, glazing, and point-of-purchase displays. The material's inherent toughness resists shattering, ensuring long-term operational safety and visual integrity in demanding industrial environments. This sheet is readily machinable and formable, allowing for precise customization to specific project requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to desired dimensions using a fine-tooth saw or router. 2. Drill holes for mounting, ensuring pilot holes are used for smaller fasteners. 3. Secure the sheet using appropriate hardware, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper technique, leading to chipping or cracking. | Utilize specialized polycarbonate drill bits or use a standard bit at a slower speed with a constant feed rate, employing a backing material. |
| Clamping the sheet too tightly during fabrication or installation, causing stress fractures. | Employ flexible clamping methods or use washers to distribute pressure evenly across a larger surface area. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Barriers, Industrial Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||