This robust polycarbonate stock sheet is engineered for demanding industrial environments. Its exceptional clarity and impact resistance make it ideal for inspection gauges, protective shields, and custom measurement fixtures.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.112" |
| Length | 44" |
| Width | 22" |
A proven choice for industrial professionals, this 0.112" thick polycarbonate stock sheet offers superior impact strength and optical clarity. Measuring 44" in length and 22" in width, it provides a substantial surface area suitable for fabricating custom jigs, fixtures, and inspection templates. Polycarbonate's inherent toughness ensures longevity in high-wear applications, resisting shattering and cracking. Its excellent dimensional stability under varying environmental conditions guarantees consistent performance for precise measurements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface where the sheet will be installed thoroughly. 2. Carefully position the polycarbonate sheet to ensure proper alignment. 3. Secure the sheet using appropriate fasteners, avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits which can cause cracking. | Employ a sharp, high-speed drill bit specifically designed for plastics, or use a stepped drill bit. |
| Overtightening fasteners during mounting. | Use washers and allow for slight expansion by not fully tightening screws, especially in temperature-fluctuating environments. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom Inspection Gauges, Protective Machine Guards, Clear Covers for Sensitive Equipment, Work Surface Protectors, DIY Measurement Tools.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||