This 0.078-inch thick polycarbonate stock sheet, measuring 41x19 inches, is engineered for lubricating applications. Its inherent low friction properties and exceptional durability make it ideal for demanding environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.078" |
| Length | 41" |
| Width | 19" |
Precision-manufactured to tight tolerances, this 0.078-inch thick polycarbonate stock sheet offers a consistent surface finish essential for low-friction applications. Composed of high-grade polycarbonate, it exhibits superior impact strength (Izod impact: 12-15 ft-lb/in) and excellent chemical resistance. The sheet's inherent lubricity minimizes wear and tear in moving parts, making it suitable for sliding components, bearing surfaces, and wear strips. Its dimensional stability ensures reliable performance across a wide temperature range (-40°F to 240°F), preventing deformation and maintaining critical clearances in complex machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning any pre-drilled holes with mounting hardware. 3. Secure the sheet using appropriate fasteners, avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing stress cracks and reducing material integrity. | Use washers and do not overtighten screws or bolts. Allow for slight expansion and contraction. |
| Using abrasive cleaners or solvents that can damage the polycarbonate surface and its lubricating properties. | Clean with mild soap and water. Avoid harsh chemicals or abrasive pads. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction sliding surfaces, Wear strips and guides, Bearing components in low-load applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||