This high-performance Polycarbonate stock sheet offers superior impact and abrasion resistance. Its precise dimensions and clarity make it ideal for critical abrading and polishing environments where durability is paramount.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.060" |
| Length | 45" |
| Width | 34" |
Built to exacting engineering tolerances, this 0.060" thick polycarbonate stock sheet measures 45" in length and 34" in width. Polycarbonate is renowned for its exceptional impact strength, exceeding that of glass and acrylic, while maintaining excellent optical clarity. Its inherent chemical resistance and UV stability ensure long-term performance in demanding industrial settings. This material is engineered for applications requiring protection against abrasive wear and high-impact forces, commonly found in manufacturing, tooling, and protective shielding.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with the intended application area. 3. Secure the sheet using appropriate mechanical fasteners or adhesives, ensuring even distribution of stress to prevent premature cracking or delamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners leading to stress cracking. | Use washers and do not overtighten screws. Allow for thermal expansion by using slightly oversized holes. |
| Using incompatible cleaning agents that can craze or cloud the polycarbonate surface. | Clean with mild soap and water or approved polycarbonate cleaning solutions. Avoid abrasive cleaners or solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective shielding in abrasive environments, Tooling and jig components requiring impact resistance, Polishing fixture surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||