This 0.037" thick polycarbonate stock sheet offers exceptional impact strength and optical clarity, making it ideal for protective covers and enclosures in electrical and lighting applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.037" |
| Length | 12" |
| Width | 46" |
Designed for demanding industrial environments, this 0.037" thick polycarbonate stock sheet (12"x46") provides superior impact resistance, exceeding that of glass and acrylic. Its excellent optical clarity ensures minimal light distortion, crucial for lighting fixtures. The material's inherent flame retardancy (UL94 V-0 rating) and wide operating temperature range make it suitable for use in close proximity to heat sources and in environments with stringent safety requirements. Its rigidity at this thin gauge allows for lightweight yet durable designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly with a mild detergent and water, then dry completely. 2. Carefully position the polycarbonate sheet, ensuring proper alignment with mounting hardware or framing. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening which can cause stress cracking. Use large washers if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using abrasive cleaners or solvents that can damage the polycarbonate surface. | Always use mild soap and water or approved polycarbonate cleaners for maintenance. |
| Drilling holes too close to edges or without proper pilot holes, leading to cracks. | Drill holes at least 2x the thickness of the sheet from the edge and use a sharp drill bit designed for plastics. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective covers for electrical panels and control boxes, Machine guards and safety shields in lighting assembly, Light diffusers and lenses for industrial lighting fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||