This industrial-grade polycarbonate stock sheet offers exceptional clarity and impact resistance. Measuring 0.026" thick, 29" long, and 18" wide, it's engineered for demanding applications requiring durability and visibility.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.026" |
| Length | 29" |
| Width | 18" |
Precision-manufactured to tight tolerances, this polycarbonate stock sheet boasts a nominal thickness of 0.026 inches, a standard length of 29 inches, and a width of 18 inches. Constructed from high-performance polycarbonate resin, it exhibits superior impact strength, excellent optical clarity, and good thermal stability, making it suitable for a wide range of industrial fabrication. Its inherent UV resistance (depending on grade) and machinability allow for precise cutting, drilling, and shaping without compromising structural integrity, ensuring consistent performance in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the polycarbonate sheet is clean and free of debris. 2. Carefully measure and mark cut lines using a non-permanent marker. 3. Utilize appropriate cutting tools for polycarbonate, such as a fine-tooth saw or laser cutter. 4. Secure the sheet firmly during any drilling or fastening operations to prevent vibration and stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits designed for softer materials, leading to cracking or chipping. | Employ specialized polycarbonate drill bits or create pilot holes with a slow speed and light pressure. |
| Over-tightening fasteners, causing stress concentration and potential delamination or cracking. | Use washers and tighten fasteners only until snug, allowing for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and safety shields, Point-of-purchase displays and signage, Prototyping and custom fabrication components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||