This high-performance polycarbonate stock sheet offers exceptional impact resistance and clarity. At 0.012" thick, it provides a robust yet lightweight solution for protective barriers and glazing.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.012" |
| Length | 42" |
| Width | 31" |
Manufactured under strict quality controls, this 0.012" thick polycarbonate stock sheet (42" x 31") exhibits superior impact strength and optical clarity, exceeding industry standards for safety glazing. Its inherent toughness makes it resistant to shattering, even under significant stress, ensuring reliable protection. The material's excellent UV resistance and wide operating temperature range further enhance its suitability for demanding environments. This sheet is ideal for applications requiring a durable, transparent barrier that can withstand accidental impacts and environmental exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled mounting points or frame. 3. Secure the sheet using appropriate fasteners, ensuring not to over-tighten to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge. | Maintain a minimum edge distance of 1.5 times the hole diameter when drilling to prevent stress concentration and potential cracking. |
| Using abrasive cleaning agents. | Clean the polycarbonate surface with mild soap and water, followed by a rinse and a soft cloth. Avoid harsh chemicals or abrasive pads. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Safety Shields, Protective Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||