This high-quality polycarbonate stock sheet offers exceptional impact resistance and clarity. Measuring 0.011" thick, 37" long, and 15" wide, it is engineered for demanding industrial and DIY applications requiring a durable yet lightweight protective solution.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.011" |
| Length | 37" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 0.011" thick polycarbonate stock sheet ensures consistent performance and fit. Its exceptional impact strength, significantly higher than glass, coupled with excellent optical clarity, makes it suitable for applications where safety and visibility are paramount. The material's inherent UV resistance provides long-term durability against environmental degradation. Standard dimensions of 37" length and 15" width offer versatile utilization in fabrication and protective barrier construction. Operating temperature range is -40°F to 250°F.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the polycarbonate sheet according to required dimensions. 2. Carefully cut the sheet using a fine-tooth saw or specialized polycarbonate cutting tool. 3. Smooth all edges with fine-grit sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ a fine-tooth blade on a circular saw or a laser cutter for precise, chip-free cuts. Ensure blade speed is appropriate for polycarbonate. |
| Drilling holes too close to edges without proper reinforcement. | Maintain a minimum edge distance of at least 2x the hole diameter. Use a sharp drill bit designed for plastics and avoid excessive pressure. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding and safety shields, Protective glazing for equipment, DIY crafting and custom fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||