This high-performance 0.249-inch thick polycarbonate stock sheet is engineered for demanding pneumatic systems. Offering exceptional impact resistance and clarity, it's ideal for protective guarding and fluid containment.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.249" |
| Length | 41" |
| Width | 37" |
Built to exacting engineering tolerances, this 0.249" thick polycarbonate sheet measures 41" in length and 37" in width, meeting stringent dimensional requirements for critical pneumatic components. Its superior impact strength, surpassing that of glass, ensures robustness in high-pressure environments. Polycarbonate exhibits excellent thermal stability and resistance to many industrial lubricants and hydraulic fluids commonly found in pneumatic circuits, guaranteeing longevity and performance. This material's inherent toughness and clarity make it a preferred choice for machine guarding, sight glasses, and enclosure panels where both safety and visual inspection are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the polycarbonate sheet is clean and free of debris. 2. Accurately measure and cut the sheet to the required dimensions using appropriate cutting tools for polycarbonate. 3. Securely fasten the sheet using the specified hardware, avoiding overtightening which can cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ specialized plastic cutting blades (e.g., fine-tooth carbide) and maintain a slow, steady feed rate. |
| Over-drilling holes or using improper fasteners, causing stress concentrations and potential failure. | Drill holes slightly oversized for expansion and use rubber washers or grommets with fasteners to distribute load. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic machine guarding, Sight glasses for pneumatic reservoirs, Enclosures for pneumatic control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||