This premium polycarbonate stock sheet is engineered for demanding lubricating applications. Its inherent material properties offer exceptional durability, impact resistance, and low friction for extended operational life in challenging environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.926" |
| Length | 33" |
| Width | 31" |
Purpose-built for heavy-duty applications, this 0.926-inch thick polycarbonate sheet boasts superior impact strength (Izod: 12 ft-lb/in) and excellent abrasion resistance. The material's low coefficient of friction (0.25) minimizes wear and heat generation in sliding applications. Its dimensional stability across a wide temperature range (-40°C to 120°C) ensures consistent performance. The 33-inch by 31-inch dimensions provide ample material for custom fabrication in areas requiring reduced friction, such as bearing surfaces, wear strips, and protective guards in high-cycle machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using mechanical fasteners designed for polycarbonate, avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without proper washers or spacing. | Utilize large-diameter washers and allow for expansion by drilling slightly oversized holes to prevent stress concentration and cracking. |
| Exposing the material to solvents or aggressive cleaning agents. | Clean with mild soap and water or isopropyl alcohol. Consult material compatibility charts for specific chemical resistance. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips, Self-lubricating bearing components, Protective guards for sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||