Engineered for exceptional durability and clarity, this 0.603-inch thick polycarbonate sheet offers superior impact resistance and optical performance, ideal for demanding industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.603" |
| Length | 28" |
| Width | 28" |
Specified by design engineers worldwide, this premium polycarbonate stock sheet provides unparalleled strength and impact resistance. Measuring 0.603 inches in thickness, with a generous 28-inch by 28-inch surface area, it is manufactured from high-grade polycarbonate resin known for its exceptional clarity, UV stability, and broad chemical resistance. This material's inherent toughness makes it an excellent choice for protective shielding, machine guards, and robust glazing applications where safety and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning with mounting points. 3. Secure using appropriate fasteners designed for polycarbonate, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without appropriate washers or grommets. | Employ specialized polycarbonate fasteners with built-in cushioning or oversized washers to prevent stress cracking and material deformation. |
| Drilling holes too close to the edge of the sheet. | Maintain a minimum edge distance of at least 2 times the hole diameter to prevent cracking during installation and under load. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Shielding, Industrial Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||