This high-performance polycarbonate stock sheet, engineered for critical electrical and lighting applications, offers exceptional impact strength and clarity for demanding environments. Its robust nature ensures reliable protection and optimal light transmission.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.528" |
| Length | 34" |
| Width | 30" |
Precision-manufactured to tight tolerances, this 0.528" thick polycarbonate sheet, measuring 34" x 30", exhibits superior impact resistance, exceeding that of glass and acrylic. Its excellent dielectric strength makes it ideal for electrical insulation and enclosure applications. The material's inherent UV stability and wide operating temperature range (typically -40°F to 250°F) ensure long-term performance in diverse environmental conditions. It is also highly flame retardant, meeting stringent industry standards for safety in lighting fixtures and electrical panel covers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Carefully position the polycarbonate sheet, aligning with mounting points or frame. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too long, potentially damaging underlying components. | Utilize fasteners specifically designed for sheet mounting, ensuring adequate length without over-penetration. |
| Drilling mounting holes too close to the edge, leading to material failure. | Maintain a minimum edge distance of at least 1.5 times the fastener diameter when drilling holes. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Electrical Enclosures & Housings, Machine Guards for Electrical Equipment, Lighting Fixture Covers & Diffusers, Control Panel Covers, Electrical Insulation Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||