This 0.500-inch thick polycarbonate sheet offers exceptional impact resistance, optical clarity, and UV stability. It's a premium raw material engineered for durability in demanding environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.500" |
| Length | 44" |
| Width | 16" |
Built to exacting engineering tolerances, this polycarbonate stock sheet measures 0.500 inches thick, 44 inches in length, and 16 inches in width. Composed of high-quality polycarbonate resin, it exhibits a tensile strength of approximately 6,500 psi and an Izod impact strength of over 200 ft-lb/in, demonstrating superior toughness. Its excellent optical clarity (approx. 88% light transmission) and operating temperature range of -40°F to 240°F make it suitable for diverse applications requiring robust, transparent materials.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and structurally sound. 2. Carefully position the polycarbonate sheet, aligning with mounting points or intended geometry. 3. Secure the sheet using appropriate fasteners, avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too short, leading to inadequate support. | Utilize fasteners of sufficient length to achieve proper engagement with the mounting surface. |
| Drilling holes too close to the edge, compromising the sheet's structural integrity. | Maintain recommended edge distances when drilling holes to prevent stress concentration and potential delamination. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding, Protective windows, Glazing applications, Industrial enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||