Engineered for robust performance, this 0.306-inch thick polycarbonate sheet offers exceptional impact resistance and clarity. Its precise dimensions (26" x 22") make it ideal for custom fabrication in demanding industrial settings.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.306" |
| Length | 26" |
| Width | 22" |
Designed for demanding industrial environments, this 0.306" thick polycarbonate stock sheet provides superior impact strength, exceeding that of glass and acrylic. Its inherent toughness ensures resilience against high-velocity projectiles and extreme operational stresses. The 26" x 22" dimensions offer ample material for a variety of fabrication projects, including machine guarding, protective enclosures, and industrial glazing applications where shatter resistance and optical clarity are paramount. This material is also UV-stabilized for extended outdoor use and exhibits excellent temperature resistance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark cut lines on the protective film of the polycarbonate sheet. 2. Utilize appropriate cutting tools (e.g., fine-tooth saw, laser cutter) to achieve precise dimensions, ensuring smooth edges. 3. Secure the cut sheet using appropriate mounting hardware, avoiding excessive stress concentration points to prevent cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper technique, leading to cracking. | Employ a sharp drill bit designed for plastics, and drill slowly with minimal pressure. Consider using a pilot hole and a countersink bit for screw clearance. |
| Over-tightening fasteners, causing stress fractures. | Use washers to distribute load and tighten fasteners only until snug. Allow for thermal expansion by using slightly oversized holes or slotted mounting points. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guards, Industrial Glazing, Protective Barriers, Signage, Tooling and Fixturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||