This high-performance 0.241-inch polycarbonate stock sheet offers exceptional clarity and impact resistance. Specifically engineered for demanding abrading and polishing processes, it provides a durable, non-marring surface for precision work.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.241" |
| Length | 12" |
| Width | 35" |
Specified by design engineers worldwide, this 0.241" thick polycarbonate stock sheet (12" x 35") delivers unparalleled optical clarity and superior impact strength. Its inherent toughness makes it resistant to abrasion and chemicals commonly encountered in industrial polishing and finishing operations. The material's excellent dimensional stability ensures consistent performance under varying environmental conditions, making it the preferred choice for jigs, fixtures, and protective shields in high-wear applications. Compliance with relevant industry standards is assured.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the substrate and the polycarbonate sheet using a mild detergent and lint-free cloths. 2. Apply a suitable industrial-grade adhesive or mechanical fasteners as per application requirements, ensuring even distribution and avoiding excessive pressure. 3. Allow adequate curing time for the adhesive or tightening of fasteners before subjecting the sheet to operational loads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using abrasive cleaners or solvents that can damage the polycarbonate surface. | Clean only with mild soap and water or specialized polycarbonate cleaners, using soft, lint-free cloths. |
| Over-tightening fasteners, leading to stress cracking or distortion. | Use appropriate torque settings and consider using rubber washers to distribute pressure evenly. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Precision polishing jigs and fixtures, Protective shields for high-wear machinery, Abrasion-resistant covers for sensitive equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||