This 0.213-inch thick polycarbonate sheet is engineered for demanding fabrication projects. Offering exceptional impact resistance and optical clarity, it's the ideal material for protective barriers, machine guarding, and custom enclosures requiring superior durability.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.213" |
| Length | 18" |
| Width | 32" |
Purpose-built for heavy-duty applications, this 0.213" thick polycarbonate stock sheet measures 18" x 32". Fabricated from high-impact polycarbonate resin, it exhibits superior tensile strength, excellent clarity, and a broad operating temperature range, making it resistant to shattering and extreme conditions. Its inherent toughness ensures longevity in demanding environments, suitable for machine guarding, protective shields, industrial glazing, and custom fabrication projects where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the polycarbonate sheet is clean and free of debris before handling. 2. Carefully measure and mark cut lines according to project specifications. 3. Utilize appropriate cutting tools (e.g., scoring knife, jigsaw with fine-tooth blade) for precise cuts, minimizing stress on the material. 4. Smooth cut edges with fine-grit sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits without proper technique, leading to cracking. | Employ slow drill speeds and a sharp bit, preferably a specialized plastic bit, with a pilot hole to prevent stress and cracking. |
| Over-tightening fasteners, causing stress concentrations and potential failure. | Use washers and avoid overtightening; allow for thermal expansion by drilling slightly oversized holes. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Shields and Barriers, Industrial Glazing, Custom Fabrication Projects.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||