This fabrication-grade polycarbonate sheet offers superior impact resistance and optical clarity. Measuring 0.120" thick, 17" wide, and 45" long, it's engineered for demanding custom applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.120" |
| Length | 17" |
| Width | 45" |
Engineered for reliability and performance, this polycarbonate stock sheet boasts a nominal thickness of 0.120 inches, a width of 45 inches, and a length of 17 inches. Fabricated from high-impact polycarbonate resin, it exhibits excellent tensile strength, rigidity, and a high degree of transparency. Its thermal stability allows for a wide range of processing techniques, including cutting, drilling, bending, and thermoforming. This material is well-suited for applications requiring robust protection against impact and environmental factors, while maintaining visual clarity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark cut lines on the polycarbonate sheet using a non-permanent marker and a straight edge. 2. Utilize a fine-tooth saw blade designed for plastics, such as a carbide-tipped blade, for clean cuts. Maintain a steady, moderate speed to prevent melting. 3. Smooth any sharp edges with fine-grit sandpaper (400-grit or higher) or a deburring tool to ensure a finished appearance and safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard metal-cutting saw blade, which can lead to chipping and melting. | Always use a saw blade specifically designed for cutting plastics, featuring a fine tooth pitch and sharp teeth. |
| Applying excessive pressure during cutting, causing stress cracks or delamination. | Allow the saw to do the work; apply consistent, light pressure and maintain a steady feed rate. |
| Drilling holes too close to the edge without proper support, leading to cracking. | Maintain adequate edge distance for drilled holes, and consider using a backing material during drilling. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective guards and machine enclosures, Custom signage and displays, Glazing and architectural elements, Point-of-purchase displays.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||